SSepticCalc

Drain Field Size Calculator (Leach Field Sizing)

The drainfield (leach field) is sized from your soil's acceptance rate: required area = daily flow ÷ the gallons each square foot can absorb. Pick your soil type or enter a percolation rate to size it.

Septic tank
1,000 gal
450 gpd design flow
Drainfield
645 ft²
gravel trench · ≈ 323 ft
Installed cost
$3,950–$8,500
Conventional gravity · typ. $6,550
Pump every
2–4 yrs
~4 occupants
Recommended system: Conventional gravity

Soil accepts effluent well and the water table is deep, so a conventional gravity drainfield is the simplest, lowest-cost option.

Soil / percolation test$300
Design & permit$600
Septic tank (1,000 gal, supplied & set)$1,200
Conventional gravity gravel trench (645 ft²)$3,250
Excavation & site work$1,200

Planning estimate from standard onsite-wastewater design rules, calibrated to 2026 contractor ranges. Most codes also require a 100% reserve area (~645ft²). Your county health department's approved soil test and design govern the final permit.

Compare system types for your site

What each system would cost for these inputs. Greyed rows aren't suitable for your soil or water table.

SystemDispersal areaInstalled cost
Conventional gravityRecommended645 ft²$3,950–$8,500
Chamber385 ft²$3,600–$7,800
Mound565 ft²$9,100–$19,700
Aerobic (ATU)750 ft²$9,500–$20,550
Get the full design-estimate report — $29

A detailed, shareable PDF for this exact estimate: tank & drainfield sizing with reserve area, all four system options costed, your state's permit checklist, soil/perc guidance and the questions to ask installers. Built for your inputs above.

What to know about drainfield size

Need a detailed design estimate?

This estimate is ideal for planning and checking a quote. For a report you can take to a designer or installer, SepticCalc Pro produces a detailed septic design estimate as a PDF.

See Pro →

Related guides

Other calculators