Septic Tank & System Replacement Cost
Replacing just a cracked tank is far cheaper than replacing a failed drainfield or a whole system. Estimate a full-system replacement for your home below — tank, field, design and permit included.
Soil accepts effluent well and the water table is deep, so a conventional gravity drainfield is the simplest, lowest-cost option.
| Soil / percolation test | $300 |
| Design & permit | $600 |
| Septic tank (1,000 gal, supplied & set) | $1,200 |
| Conventional gravity gravel trench (645 ft²) | $3,250 |
| Excavation & site work | $1,200 |
Planning estimate from standard onsite-wastewater design rules, calibrated to 2026 contractor ranges. Most codes also require a 100% reserve area (~645ft²). Your county health department's approved soil test and design govern the final permit.
What each system would cost for these inputs. Greyed rows aren't suitable for your soil or water table.
| System | Dispersal area | Installed cost |
|---|---|---|
| Conventional gravityRecommended | 645 ft² | $3,950–$8,500 |
| Chamber | 385 ft² | $3,600–$7,800 |
| Mound | 565 ft² | $9,100–$19,700 |
| Aerobic (ATU) | 750 ft² | $9,500–$20,550 |
A detailed, shareable PDF for this exact estimate: tank & drainfield sizing with reserve area, all four system options costed, your state's permit checklist, soil/perc guidance and the questions to ask installers. Built for your inputs above.
What to know about replacement cost
- •Replacing only the tank typically runs $1,500–$5,000; a failed drainfield or full system is much more.
- •If the field has failed, soil and water-table conditions may force a more expensive system than the original.
- •A replacement usually needs a fresh permit and, often, a new soil/perc evaluation.
Need a detailed design estimate?
This estimate is ideal for planning and checking a quote. For a report you can take to a designer or installer, SepticCalc Pro produces a detailed septic design estimate as a PDF.
See Pro →