What Is a Perc Test? (And How It Sizes Your Septic System)
Before you can build a septic system — or often before you can even buy unsewered land — you need a percolation test. It's the single measurement that decides whether the lot can support a septic system, what type, and how big the drainfield must be.
What it measures
A perc test measures how fast water drains through your soil, expressed in minutes per inch. A hole is dug, pre-soaked, then filled with water, and the drop is timed. Fast soils (low minutes per inch) absorb effluent readily; slow soils (high minutes per inch) absorb little.
How the result is used
The perc rate converts to a long-term acceptance rate — the gallons each square foot of drainfield can absorb per day. Your design flow divided by that rate gives the required field area. A fast-draining lot might need 400–600 ft²; a slow clay lot, several times that, or an alternative system entirely.
What it costs and who does it
- •Typical cost: $150–$1,500, depending on the number of test holes and whether an engineer is required.
- •Many counties require a licensed soil evaluator or engineer to perform or witness the test.
- •Results are usually valid for a set period and tied to the specific tested location.
If the lot fails
A failed perc test doesn't always mean no house — it often means a more expensive engineered system (mound or aerobic) instead of a conventional one. Enter your perc rate into the calculator to see how it changes the field size and which system the soil points to.
Size your septic system in seconds
Get the tank size, drainfield area and cost for your home now.
Open the calculator →