Conventional Septic System Cost
A conventional gravity system — septic tank feeding gravel-and-pipe trenches — is the simplest and cheapest design where the soil drains well and the water table is deep. Estimate the installed cost for your home below.
Soil accepts effluent well and the water table is deep, so a conventional gravity drainfield is the simplest, lowest-cost option.
| Soil / percolation test | $300 |
| Design & permit | $600 |
| Septic tank (1,000 gal, supplied & set) | $1,200 |
| Conventional gravity gravel trench (645 ft²) | $3,250 |
| Excavation & site work | $1,200 |
Planning estimate from standard onsite-wastewater design rules, calibrated to 2026 contractor ranges. Most codes also require a 100% reserve area (~645ft²). Your county health department's approved soil test and design govern the final permit.
What each system would cost for these inputs. Greyed rows aren't suitable for your soil or water table.
| System | Dispersal area | Installed cost |
|---|---|---|
| Conventional gravityRecommended | 645 ft² | $3,950–$8,500 |
| Chamber | 385 ft² | $3,600–$7,800 |
| Mound | 565 ft² | $9,100–$19,700 |
| Aerobic (ATU) | 750 ft² | $9,500–$20,550 |
A detailed, shareable PDF for this exact estimate: tank & drainfield sizing with reserve area, all four system options costed, your state's permit checklist, soil/perc guidance and the questions to ask installers. Built for your inputs above.
What to know about conventional cost
- •Conventional systems work by gravity with no pump, which keeps both install and running costs down.
- •They need reasonably permeable soil (sand to loam) and a water table well below the trenches.
- •Where conventional won't pass, you'll be looking at a mound or aerobic system at significantly higher cost.
Need a detailed design estimate?
This estimate is ideal for planning and checking a quote. For a report you can take to a designer or installer, SepticCalc Pro produces a detailed septic design estimate as a PDF.
See Pro →