SSepticCalc

Septic System Cost in Georgia

A typical 3-bedroom conventional septic system in Georgia runs about $3,600–$7,800 installed. The calculator below is scaled to Georgia's costs — adjust bedrooms and soil for your own estimate.

Septic tank
1,000 gal
450 gpd design flow
Drainfield
645 ft²
gravel trench · ≈ 323 ft
Installed cost
$3,600–$7,800
Conventional gravity · typ. $6,000
Pump every
2–4 yrs
~4 occupants
Recommended system: Conventional gravity

Soil accepts effluent well and the water table is deep, so a conventional gravity drainfield is the simplest, lowest-cost option.

Soil / percolation test$300
Design & permit$550
Septic tank (1,000 gal, supplied & set)$1,100
Conventional gravity gravel trench (645 ft²)$2,950
Excavation & site work$1,100

Planning estimate from standard onsite-wastewater design rules, calibrated to 2026 contractor ranges. Most codes also require a 100% reserve area (~645ft²). Your county health department's approved soil test and design govern the final permit.

Compare system types for your site

What each system would cost for these inputs. Greyed rows aren't suitable for your soil or water table.

SystemDispersal areaInstalled cost
Conventional gravityRecommended645 ft²$3,600–$7,800
Chamber385 ft²$3,350–$7,200
Mound565 ft²$8,350–$18,150
Aerobic (ATU)750 ft²$8,750–$18,900
Get the full design-estimate report — $29

A detailed, shareable PDF for this exact estimate: tank & drainfield sizing with reserve area, all four system options costed, your state's permit checklist, soil/perc guidance and the questions to ask installers. Built for your inputs above.

Septic permits in Georgia

In Georgia, onsite septic systems are permitted through your county health department. Before a permit is issued you'll typically need a soil or percolation test and a system design sized to your home and lot. Georgia uses roughly 150 gallons per bedroom per day as the design flow, with a 1,000-gallon minimum tank — but the exact requirements are set locally, so confirm with your county before you build.

If your soil drains poorly or the water table is high, Georgia (like every state) will require an alternative system such as a mound or aerobic unit, which costs significantly more. Use the calculator to see which system your soil points to.

Georgia septic FAQs

How much does a septic system cost in Georgia?
A typical 3-bedroom conventional septic system in Georgia runs about $3,600–$7,800 installed, scaled to Georgia's regional construction costs. Mound and aerobic systems for poor soils or high water tables cost more. Use the calculator for your home's exact estimate.
Who issues septic permits in Georgia?
In Georgia, onsite septic systems are permitted through your county health department. A soil/percolation test and a system design are typically required before a permit is issued.
What size septic tank do I need in Georgia?
Georgia uses roughly 150 gallons per bedroom per day for design flow with a 1,000-gallon minimum tank. A 3-bedroom home needs about a 1,000-gallon tank; confirm the exact requirement with your county.

Septic calculators

Other states